3.Connect one end of the Mac mouse cable included with the ELP Link III set to the MOUSE terminal on the square end of the main cable.
4.Connect the other end of the Mac mouse cable to the mouse port on the back of the PowerBook.
5.Connect either end of the Mac serial cable to the SERIAL terminal on the square end of the main cable. Connect the other
end of the Mac serial cable to the 
printer or 
modem port on the back of your PowerBook.
Note: After you turn on the projector and computer, you may need to choose Mirroring in the Display Control Panel to display the image on the LCD screen as well as the projector screen. See your Macintosh documentation for details. (This step is not necessary on some newer systems, which can detect a dual video signal.)
6.Now install the software as described on page 87.
Installing the Software
ELP Link III software can be used with the following operating systems:
●
●
●
●
Windows 3.x
Windows 95
Windows 98
Windows NT 4.0
Installing the Software | 85 |