Connecting to a PC Desktop Computer

The main cable included in your ELP Link III set connects the PS/2 mouse cable (needed to use the remote control as a mouse) and

9-pin serial cable (needed to use the ELP Link III software and the Effects buttons on the remote control) from your computer to the projector.

PS/2 mouse cable

Mouse/Com port

9-pin serial cable

 

main cable

1.If you connected the PS/2 mouse cable included with the projector as described on page 22, disconnect it from the computer and the projector.

2.Connect the round end of the main cable to the projector’s Mouse/Com port.

78

4 • Using the ELP Link III Software