3.Connect the Mac mouse cable included with the ELP Link III set to the MOUSE terminal on the square end of the main cable.
4.If your computer’s mouse cable is still connected to the computer, disconnect it. Then connect the other end of the Mac mouse cable included with the ELP Link III kit to the Mouse port on your Macintosh.
5.Connect either end of the Mac serial cable to the SERIAL terminal on the square end of the main cable. Connect the other
end of the Mac serial cable to the 
printer or 
modem port on the back of your Macintosh.
6.Go to page 85 to install the software.
Connecting the ELP Link III Cables | 83 |