Turning the Equipment On and Off
It’s best to turn on the projector and its attached equipment in the following order:
1.Video source (such as a VCR), if your video source is not your computer
2.Audio source (if different from computer or video source)
3.External amplified speaker or PA system (if necessary)
4.Computer
5.Projector (see instructions below)
When you are ready to turn off the equipment, do so in the reverse order.
Turning the Projector On and Off
1.Remove the projector lens cap.
2.Connect one end of the power cord to the projector’s power inlet, and connect the other end to a grounded electrical outlet.
3.Turn on the main power switch located at the rear of the projector and wait until the power light remains orange.
4.Press the Power button on the remote control or control panel. The power light flashes green as the projector warms up. When the projector is fully warmed up, this light remains green.
Turning the Equipment On and Off | 41 |