If computer or video equipment is attached, the computer or video signal is projected. Allow about 30 seconds for full illumination.
✦Warning: Never look into the lens when the lamp is on. This can damage your eyes. It is especially important that children not look into the lens.
When you want to stop projecting images, press the Power button again. The fan remains on and the power light flashes orange for about two minutes as the projector cools down.
power light
projection lamp light
temperature light
When the projector has cooled down, the power light stops flashing and remains orange.
To turn off the projector completely, turn off the main power switch at the rear of the projector after the power light becomes orange.
Note: If you press the Power button to turn the projector back on while the power light is orange, there may be a delay before a projected image appears.
42 | 2 • Using the Projector |