LOREX Technology LH3481001C8B, LH340 EDGE3, LH330 EDGE2 Alarm, Enabling / Disabling System Buzzers

Using the Main Menu

Alarm

The Alarm Menu allows you to configure settings for alarms and motion detection. It also allows you

to enable and disable the system buzzers.

Alarm Menu

To access the Alarm Menu, click then .

Enabling / Disabling System

Buzzers

The DVR has two buzzer options, a system buzzer and a key buzzer. The system buzzer beeps during alarms, motion events, and system events. The key buzzer beeps when buttons are pressed.

To enable / disable system buzzer:

1From the Alarm Menu, click Buzzer. Scroll up / down and select O to enable the system buzzer or select X to disable it.

2Right-click to save your changes and return to the Main Menu.

To enable / disable the key buzzer:

1From the Alarm Menu, click Key Buzzer. Scroll up / down and select O to enable the key buzzer or select X to disable it.

2Right-click to save your changes and return to the Main Menu.

Enabling / Disabling Motion

Detection

1From the Alarm Menu, click Motion Enable under the camera that you wish to configure.

2Scroll up / down and select O to enable motion detection or X to disable it.

3Right-click to save your changes and return to the Main Menu.

Enabling / Disabling Video Loss Alarms

Video loss alarms occur when cameras are disconnected or suffer a loss of video. The DVR employs a pre-record function to capture video from seconds before the video loss occurred.

To enable / disable video loss alarms:

1From the Alarm Menu, click Video Loss Alarm under the camera you wish to configure.

2Scroll up / down and select O to enable the video loss alarm or X to disable it.

3Right-click to save your changes and return to the Main Menu.

Configuring Alarm Settings

1From the Alarm Menu, click Alarm Setup. The Alarm Setup Menu opens.

Alarm Setup Menu

40