LOREX Technology LH340 EDGE3, LH3481001C8B Setup, Changing the Resolution and Video Output Mode

Using the Main Menu

Setup

The Setup Menu allows you to configure system settings

including, the date / time, language, video settings, passwords, and the internal fan speed. You can also view system information or reset the DVR to factory settings.

Setup Menu

To access the Setup Menu, click then .

•To change the date and time, see “Setting the Date and Time” on page 19.

•ToenableorconfigureDVRpasswords,see “Managing Passwords” on page 28.

Changing the Resolution and Video Output Mode

1From the Setup Menu, click Video-Out Setup. The Video-Out Setup Menu opens.

2Click Video-Out Resolution. Scroll up / down to select your video output type (VGA or HDMI) and resolution or select Auto for the DVR to automatically detect the best resolution for your monitor (recommended).

3Click Video-Out Update.

4Click Yes to save your changes or No to discard them. If you do not select Yes or

No, the DVR will return to the previous resolution setting in 30 seconds.

5Right-click to return to the Setup Menu.

Accessing System Information

•From the Setup Menu, click Information. Right-click to exit the Information window.

Changing the Fan Speed

Changing the fan speed affects the internal temperature of the DVR.

1From the Setup Menu, click Fan Speed. Scroll up / down to select High, Medium, or Low.

2Right-click to save your settings and return to the Main Menu.

Selecting PAL or NTSC

1From the Setup Menu, click NTSC/PAL Select. Scroll up / down to select NTSC (for North America), PAL (for Europe), or Auto (the system automatically detects the format of the connected cameras, recommended).

2Right-click to save your settings and return to the Main Menu.

Changing the System Language

1From the Setup Menu, click Language. Scroll up / down to select the language.

2Right-click to save your settings and return to the Main Menu.

Adjusting HDMI Screen Size

On some HDTV’s, the top or bottom of the screen may be cut off by the display. If this happens, follow the steps below.

To adjust HDMI Screen Size:

1Click or press on the front panel of the DVR to open the Main Menu.

2Click to open the Setup Menu.

33