Appendix F: Replacing the Hard Drive
5Carefully slide the hard drive back until it is clear of the SATA connector and lift it out of the DVR.
SATA connector 
Replacing the Hard Drive
To replace the hard drive:
1Place the hard drive into the DVR. Make sure to align the SATA ports on the hard drive with the DVR SATA connector.
Hard drive
SATA ports
DVR SATA connector
2Slide the hard drive onto the DVR SATA connector.
3Hold the hard drive in place with your hand and carefully turn the DVR over. Replace the hard drive screws (4x) on the bottom panel of the DVR.
It is EXTREMELY IMPORTANT that you hold the hard drive in place while turning the DVR over and replacing the bottom panel screws. Not holding the hard drive can break the DVR.
116
