LOREX Technology LH330 EDGE2 Configuring Network Settings, Configuring Remote Access Passwords

Using the Main Menu

reconnect the power adapter to the DC 12V port.

5To confirm that the new port number is

saved on your system, press the button on the front panel or remote control to view System Information.

HTTP Port

You must update your DVR List in the Client Software to use the new port. Also, when logging into your DVR with an Internet browser you must include a colon and the HTTP port in the URL after the DDNS address or IP address (for example, http://tomsmith.lorexddns.net:85).

If you have already completed router port forwarding, you will need to re-configure your router to forward the newly selected port.

Configuring Network Settings

The following steps are only required if you need to enter a custom IP address, subnet mask, gateway address, or DNS server for your DVR. Consult your router’s user guide for details.

1Configure the following:

•IP:ConfigureacustomIPaddressforyour DVR. This address will only be used if DHCP is disabled.

•Mask: Configure a custom subnet mask for your DVR.

•Gateway: Configure a custom gateway address for your DVR.

•DNS Server: Configure a custom DNS server for your DVR.

•DHCP Enable: Scroll up / down and select O to enable DHCP or X to enable a fixed IP address.

2Right-click to save your changes and return to the Main Menu.

Configuring Remote Access

Passwords

Use the LAN Password Menu to control Remote Access passwords for USER1, USER2, and ADMIN profiles. The Remote Access password is required when accessing the DVR over the Internet or a local network.

To change Remote Access passwords:

1From the LAN Menu, select LAN Password and enter the ADMIN user ID and password if needed (By default, ID: 9; Password: 3333).

LAN Password Menu

2Select a user account, and use the Password Wheel to enter the new Remote Access password. Enter it again to confirm.

47