LOREX Technology LH330 EDGE2, LH340 EDGE3 Enabling and Disabling Passwords, Changing Passwords

Managing Passwords

Enabling and Disabling Passwords

By default, passwords are disabled. With passwords enabled, you need to enter your user ID and password to access the system Main Menu, Event List, or Playback mode.

To enable/disable passwords:

1Click to open the Main Menu. Enter your user ID and password if needed.

2Click . The Setup menu opens.

3Click DVR Password. The DVR Password menu opens.

4	Click Password Enable and scroll up / down to	DVR Password Menu
	select O to enable passwords or X to disable.
5	Right-click until you have exited all menus to save your changes.
	NOTE: When you are logged in, this icon is shown at the top-left corner of the screen:			.
	The number represents your user ID. To log out, right-click or click		from
	Viewing mode.

Changing Passwords

If passwords are enabled, you must be logged in as ADMIN in order to change passwords.

To change passwords:

1Click to open the Main Menu.

2Click . The Setup menu opens.

3Click DVR Password. The Password Wheel opens. Enter the ADMIN user ID and password if needed.

4Click the account you would like to change.

5Use the Password Wheel to enter a 4-digit password. Enter it again to confirm.

6Right-click until you have exited all menus to save your changes.

NOTE: To change the Remote Access passwords see “Configuring Remote Access Passwords” on page 47.

Enter the new password twice to change passwords

Password change confirmation

29