LOREX Technology LH340 EDGE3 Internet Explorer, You must port forward, Connect to your system

DVR Netviewer: Viewing Your DVR Using a Web Browser

Internet Explorer

Remote viewing using Internet Explorer is supported on		You must port forward
Internet Explorer versions 6 and higher. The instructions	!	your router before you can
below describe how to connect to your DVR on Internet		connect to your system
Explorer 6 through 8. See page 79 for instructions		using a web browser (e.g.
specific to Internet Explorer 9 and 10.		Internet Explorer)

To view your DVR using Internet Explorer:

1Open Internet Explorer and enter your DVR’s DDNS address or IP address in the address bar.

NOTE: When opening Internet Explorer, it is recommended to right-click the Internet Explorer icon from your Start Menu or Desktop, and select Run as administrator. This will allow

you to use the remote back up feature to save

video files from your DVR on your computer hard Run as administrator drive.

2In the ID and Password fields, enter your remote access ID (default: 9) and password (default: 3333) and click Login.

•If you enter the incorrect ID or password, the login page will refresh and the fields will clear.

3You must install the ActiveX® plug-in for DVR

Netviewer to function. Click the attention bar at

the top of the main page and select Install this
Add-on for All Users on This Computer.... DVR	Login screen
Netviewer will reset.
Click the ActiveX attention bar

Select Install this Add-on for All Users on

This Computer...

4Re-enter your ID and password and click Login. An installation window opens.

Click Install

78