Installing SHARP Digital Signage Software

Installing SHARP Digital Signage Software

You must log in as an administrator before beginning the installation process.

●Installing SHARP Digital Signage Software

1.Start your PC

2.Close down all applications.

3.Launch the SHARP Digital Signage Software setup program (setup.exe). Double-click the setup.exe fle to launch the setup program.

If a security warning saying ‘The publisher could not be verifed.’ is displayed during the installation, click [Run].

If using the “SHARP Digital Signage Software CD-ROM”

1)If the setup program is launched automatically, proceed to step 4. If the setup program does not launch after a few moments, launch the Setup.exe fle in the CD-ROM folder.

2)In the [AutoPlay] dialog box, click “Run setup.exe”.

If the [AutoPlay] dialog box does not appear, double-click the Setup.exe fle in the CD-ROM folder.

3)When the [User Account Control] dialog box appears, click [Allow] (for Windows Vista) or [Yes] (for Windows 7).

4.In the [Welcome to the Install Shield wizard...] window, click [Next].

12

Page 12
Image 12
Sharp PNSV01 operation manual Installing Sharp Digital Signage Software, If using the Sharp Digital Signage Software CD-ROM