Sharp PNSV01 operation manual Set a Display Time

Schedule Distribution Tool

Displaying break-in programs

4.Set the “Display Time of Break-in Program” area.

•“Display the break-in program as soon as distribution has been completed” option button

Displays the program as soon as the distribution wizard exits.

•“Start the break-in program at the time specifed” option button

Starts program display at the set time.

5.Set a “Display Time”

6.If you want to perform panel control operations before and after a break-in program, check the “Conduct panel control before and after the program display” check box, and click [Next].

The [Specifcation of Panel Control Command] dialog box will appear.

If you do not want to perform panel control operations before and after a break-in program, clear the “Conduct panel control before and after the program display” check box, and click [Next].

A [Confrmation] dialog box will appear. Proceed to step 9.

7.Set the [Panel Control Command]. “Before Display the Break-in Program”

•“Power ON the panel before display the program” check box

Turns the panel on before displaying the break-in program.

* It cannot be used with the LB-46GX35 and LB-52GX35.

•“Switch the panel input before display the program as below” check box

Switches to the specifed input before displaying the break-in program.

“After Display the Break-in Program”

•“Power OFF the panel after display the program” check box Turns the panel off after the break-in program has fnished.

•“Switch the panel input after display the program as below” check box Switches to the specifed input after displaying the break-in program.

8.Click [Next].

A [Confrmation] dialog box will appear.

9.Check the distribution settings, and click [Finish].

The break-in program display or display reservation will be executed.

By packaging distribution data, program information containing break-in programs and other contents can be saved as a single fle.

Click [Save the Package], and in the [Save the Package] dialog box that appears, specify a directory to save the fle to. Then enter a “File name”, and click [Save]. There is usually no need to use this function.

93