Sharp PNSV01 operation manual Setting audio and music, Click

Program Editor

Creating programs

●Setting audio and music

Set audio and music (background music) for program display.

If two or more content fles containing audio are set in different frames, both will play.

1.Click the [Sound] tab.

2.From the “Content Folder” tree, select the folder where the content files you want to use are located.

Confrm that the [Sound] tab is selected. If the tab is not selected, click on it.

You can also play back the content fle specifed with “File Path On Viewer PC” on the [Viewer Path] tab. Specify the absolute path of the target PC or the relative path of the My Contents folder (Fp.91).

3.Select the content you want to use from the “Content File” list.

For a list of compatible audio fle types, refer to p.30.

• Click while holding down [Ctrl] or [Shift] to select multiple content fles at the same time.

•Audio cannot be positioned in a layout. If you select a movie for the content fle that will be used as audio, a movie preview will be displayed in the

[Content Preview] window, but only audio will be used when the program is actually displayed.

•Clicking the “add no sound portion” button () at the bottom of the “Content File” list will allow you to add a soundless portion to the playlist. Settings for duration and order of play can be set for soundless portions in the same way as for other content fles.

4.Click .

Content fles are added to the end of the playlist. For more details about the playlist, refer to p.36.

In step 3, you can also register content fles by double-clicking them, or dragging them from the “Content File” list to the “Playlist”.

44