Sharp PNSV01 operation manual Controlling a panel manually, Deleting a panel or group

Panel Management and Option

Managing panels

●Controlling a panel manually

Set this option when you want to control the target PC manually.

When controlling the target PC manually, (when turning on the panel PC), the Wake On LAN function that operates by Magic Packets sent from the target PC must be enabled.

If the target PC is outside the same LAN segment, Magic Packets may not get through depending on router specs and settings. Contact your network administrator for more details.

1.Click [Manual Control].

The [Manual Control for the Panel (Panel PC)] dialog box will appear.

2.Check the check boxes next to the panels or groups that you want to control.

Select a “Control Command”.

The following three control commands can be sent:

•PC Power ON

•PC Reboot

•PC Power OFF

3.Click [Execute].

The control command will be sent.

●Deleting a panel or group

1. Select the panel or group that you want to delete.

If you select a group, all the panels assigned to that group will be deleted.

2.Click [Delete].

A confrmation dialog box will appear.

3.Click [OK].

81