Sharp PNSV01 Adding/editing a group, Click Add or Cancel, Names must be within 50 characters

Panel Management and Option

Managing panels

4)MAC address

Set the MAC address for the target PC if you want to turn it on from the controller PC.

5)FTP Setting

Enter the “User name” (within 30 alphanumeric characters), “Password” (within 30 alphanumeric characters), and “Port number” (1-32000) that you set for the target PC FTP settings.

• FTP settings for adding a panel can be set in advance. (Fp.83)

•If you have installed the Viewer Version, a unique FTP Server will be installed, and started as a service. The default TCP/IP port numbers are 20 and 21. If this port number is already used by another service, change the port number. The FTP settings of the target PC Client Scheduler must use the same port number. (Fp.101)

6)Power Control

If you want to turn the power of the target PC on or off at a specifed time, select the “Specify to power on/off the panel through the server at the designated time”, and set the “Time to start” and “Time to end”. (Times can be specifed in increments of 5 minutes)

3.Click [Add] or [Cancel].

●Adding/editing a group

1.To add a group, click [Add Group]. The [Add Group] dialog box will appear.

To edit a group, select the group you want to edit and click [Edit].

The [Edit Group] dialog box will appear.

• A group can be created within a group

•It is not possible to create two or more groups with the same name.

2.Select the parent group.

3.Enter a “Group name”.

(Names must be within 50 characters)

4.Click [Add] or [Cancel].

80