Installing SHARP Digital Signage Software

●Setting the environment of the target PC

Once the installation is complete, change the settings of the target PC before using this software. A description is given below, using Windows XP/Vista/7 as an example.

Auto login settings

If the target PC is to be used without an operator, Windows auto login should be enabled. If using Windows Vista, use the following procedure to enable auto login.

1.From the Windows Taskbar, click [Start], [All Programs], [Accessories], and then [Command Prompt].

The [Command Prompt] window will appear.

2.Type in “control userpasswords2” (without the inverted commas) and push [Enter].

3.If the [User Account Control] window appears, click [Continue].

The [User Accounts] dialog box will appear.

4.Clear the “Users must enter a user name and password to use this computer” check box.

5.Click [OK].

6.In the [Automatically Log On] window, enter a “User Name” and “Password”, and click [OK].

7.Type in “exit” and then press [Enter].

15

Page 15
Image 15
Sharp PNSV01 Setting the environment of the target PC, Auto login settings, Command Prompt window will appear