LOREX Technology LH3481001C8B, LH340 EDGE3, LH330 EDGE2 instruction manual DHCP Scope, 192.168.0.100

Appendix B: Assigning a Fixed IP to your DVR

3Under DHCP Server Setting, locate the Start IP Address. This value is the first IP address that the router will assign to devices that connect with DHCP. This means that you can assign any IP address to your DVR that is lower than this value.

Start IP Address 192.168.0.100

DHCP Scope:

192.168.0.100- 192.168.0.255

Step 2 of 3: Disable DHCP on the DVR and Assign a Local IP Address Outside the DHCP Scope

1Click to open the Main Menu, and then click . The LAN Menu opens.

2Beside IP, enter the desired IP address. This IP address must be outside the DHCP range specified by your router. In the example, the DHCP range begins at 192.168.0.100, so we can choose 192.168.0.89.

3Beside DHCP Enable, select X to disable DHCP. Right-click to save your settings.

Enter desired IP address

Disable DHCP

4Restart the DVR by disconnecting the power adapter from the rear panel and reconnecting it to the DC 12V port.

106