N300 Wireless Router WNR2000v4
To set up port triggering:
1.Select Advanced > Advanced Setup > Port Forwarding / Port Triggering. The Port Forwarding / Port Triggering screen displays.
2.Select the Port Triggering radio button.
The screen adjusts to display the port triggering information:
3.Clear the Disable Port Triggering check box if it is selected.
Note: If the Disable Port Triggering check box is selected after you configure port triggering, port triggering is disabled. However, any port triggering configuration information you added to the router is retained even though it is not used.
4.In the Port Triggering
The default value is 20 minutes. This value controls the inactivity timer for the designated inbound ports. The inbound ports close when the inactivity time expires because the router cannot detect when the application has terminated.
5.Click the Add Service button.
Advanced Settings
97
