NETGEAR WNR200v4 user manual Attached Devices

N300 Wireless Router WNR2000v4

For 64-bit WEP, four different WEP keys are generated. For 128-bit WEP, only one WEP key is generated, and the four key fields are populated with the same WEP key.

•If the authentication type is Shared Key:

a.Specify the active key by selecting the Key 1, Key 2, Key 3, or Key 4 radio button.

Only one key can be the active key.

b.Enter the value for the key manually:

-For 64-bit WEP, enter 10 hexadecimal digits (any combination of 0–9, A–F). The key values are not case-sensitive.

-For 128-bit WEP, enter 26 hexadecimal digits (any combination of 0–9, A–F). The key values are not case-sensitive.

5.Click the Apply button.

Attached Devices

To view all computers and devices, including intruders (unauthorized users) that are currently connected to your wired and wireless networks:

Select Basic > Attached Devices. The Attached Devices screen displays:

Wired devices are connected to the router through Ethernet cables. Wireless devices have joined the wireless network.

The Wired Devices and Wireless Devices tables show the following information:

•# (number). The order in which the device joined the network.

•IP Address. The IP address that the router assigned to this device when it joined the network. Note that this number can change if a device is disconnected and rejoins the network.

•MAC Address. The unique MAC address for each device does not change. The MAC address is typically shown on the product label.

genie Basic Settings

33