WAN Setup Screen Settings | NETGEAR WNR200v4 manual

N300 Wireless Router WNR2000v4

•QoS Setup. Quality of Service (QoS) setup. For information, see QoS Setup on page 53.

WAN Setup

The WAN Setup screen lets you configure a demilitarized zone (DMZ) server, change the maximum transmit unit (MTU) size, and enable the router to respond to a ping on the Internet (WAN) port.

To change the WAN settings:

1.Select Advanced > Setup > WAN Setup. The WAN Setup screen displays:

2.Enter the settings that you want to customize.

These settings are described in the following section, WAN Setup Screen Settings.

3.Click the Apply button.

WAN Setup Screen Settings

The following settings are available on this screen:

Disable Port Scan and DoS Protection. DoS protection protects your LAN against denial of service attacks such as Syn flood, Smurf Attack, Ping of Death, Teardrop Attack, UDP Flood, ARP Attack, Spoofing ICMP, Null Scan, and many others. By default, this check box is cleared.

Default DMZ Server. A demilitarized zone (DMZ) server can be helpful when you play online games and use videoconferencing. Be careful when you use this feature because it makes the firewall security less effective. For more information, see Default DMZ Server on page 46.

genie Advanced Home

45

Image 45

NETGEAR WNR200v4 user manual WAN Setup Screen Settings,  To change the WAN settings

Contents

N300 Wireless Router WNR2000v4 Support ComplianceTrademarks Contents Genie Advanced Home Monitoring Appendix a Supplemental Information Get to know your router Hardware Setup Unpack Your Router Hardware Features Router front panel has the following status LEDs and button Front Panel N300 Wireless Router WNR2000v4 Front panel LED descriptions Back Panel Back panel has the following buttons, ports, and connector Label Position Your Router  To prepare your router for installation Cable Your Router Verify the Cabling Connect to the router Getting Started with Netgear Genie Types of Logins and Access Router Setup PreparationWireless Devices and Security Settings Use Standard TCP/IP Properties for Dhcp Use Netgear genie after Installation Netgear genie Setup To use Netgear genie to set up your router Browse to http//routerlogin.net Upgrade Router Firmware Basic screen Router Dashboard Basic Home Screen Change the Password Password Recovery Add Wireless Devices or Computers to Your NetworkManual Method  To use WPS to join the wireless network Wi-Fi Protected Setup WPS Method Your Internet connection and network Genie Basic Settings  To view or change the Internet setup Internet Setup Does Your ISP Require a Login? Select either Yes or No Internet Setup Screen Fields Internet IP Address Basic Wireless Settings  To view or change basic wireless settings Wireless Network Wireless Settings Screen Fields  To change the WPA wireless security option and passphrase WPA-PSK, WPA2-PSK, and WPA-PSK + WPA2-PSK Mixed Mode WPA/WPA2 Enterprise  To configure WPA/WPA2 Enterprise security  To configure WEP security Attached Devices Live Parent Controls screen Parental Controls  To set up Live Parental Controls Click the Take me to the status screen button Sign in to your OpenDNS account screen Guest Network  To set up a guest network Select Basic Guest Network Genie Basic Settings Genie Advanced Home Specify custom settings LAN Setup QoS Setup  To launch the Setup Wizard Setup Wizard  To use the WPS Wizard WPS Wizard Setup Menu WAN Setup WAN Setup Screen Settings To change the WAN settings Default DMZ Server Change the MTU Size  To set up a default DMZ server  To change the MTU size LAN Setup  To change the LAN settings LAN Setup Screen Settings Use Router as a Dhcp Server Manage the Dhcp Server on the Router Set Up Address Reservation Clear the Use Router as Dhcp Server check box To reserve an IP address  To edit or delete a reserved address entry Wi-Fi Multimedia Quality of Service for Wireless Traffic QoS Setup To enable upstream QoS Optimize Internet Gaming with Upstream QoS Quality of Service Priority Rules and Internet Access  To view, change, or delete a QoS rule Select the Turn Internet Access QoS On check button Genie Advanced Home Click the Add Priority Rule button  To create a QoS policy for an application or online game Create a QoS Rule for a Router LAN Port  To edit or delete a MAC address on the MAC Device List Create a QoS Rule for a MAC Address Existing QoS rules display Security Keep unwanted content out of your Keyword Blocking of Http Traffic  To set up keyword blocking Exempt a Computer from Blocking and Logging Block Services Port Filtering To delete a keyword or domain  To specify a trusted computer  To block services Security  To schedule blocking Schedule Blocking Security Event Email Notifications  To set up email notifications Allow or Block Access to Your Network  To set up access controlSelect Advanced Security Access Control Select the Turn on Access Control check box Select the View list of allowed devices drop-down list View or Add Allowed Devices Not Connected to the Network View or Add Blocked Devices Not Connected to the Network Select the View list of blocked devices drop-down list Manage your network Administration  To check for new firmware and update your router Upgrade the Router Firmware  To view the log View and Configure Logs Manage the Configuration File Back Up Settings To configure which actions are logged  To restore configuration settings that you backed up Restore Configuration SettingsDo not interrupt the reboot process Erase Do not interrupt the reboot process Advanced Settings Advanced Wireless Settings Advanced Settings for Your Wireless Network To change advanced settings for your wireless network  To configure and enable the wireless schedule Set Up a Wireless Schedule  To change the WPS settings for your wireless network Set Up the WPS Settings  To enable and configure AP mode Wireless Access Point AP Wireless Distribution System WDS Following figure shows a wireless repeating scenario Select the Enable Wireless Repeating Function check box Set Up the Base Station Set Up a Repeater Advanced Settings Remote Computer Access Basics Port Forwarding and Port Triggering Configuration Concepts Destination port number Port Triggering to Open Incoming Ports Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering  To set up port forwarding Set Up Port Forwarding to Local Servers Click the Add Custom Service button Add a Custom Service Edit or Delete a Port Forwarding Entry Application Example Make a Local Web Server Public To edit or delete a port forwarding entry  To make a local web server public Set Up Port Triggering  To set up port triggering  To edit or delete a port triggering entry Dynamic DNS  To set up Dynamic DNS Select the Use a Dynamic DNS Service check boxDynupdate.no-ip.com Static Routes  To set up a static route  To edit or delete a static route Remote Management Select the Turn Remote Management On check box Universal Plug and Play Advanced Settings 105 IPv6  To set up an IPv6 Internet connection type IPv6 Auto Detect Requirements for Entering IPv6 Addresses IPv6 Auto Config Advanced Settings 109 IPv6 6to4 Tunnel  To set up a pass-through IPv6 Internet connection IPv6 Pass ThroughIPv6 Fixed Advanced Settings 112 IPv6 Dhcp  To set up an IPv6 Internet connection with a Dhcp server IPv6 PPPoE  To set up a PPPoE IPv6 Internet connection  To start monitoring Internet traffic Traffic Meter Advanced Settings 116 Advanced Settings 117 Monitor your router and network traffic Monitoring Router Status and Usage Information Screen Internet Port Pane Router Information PaneLAN Port  To display the Internet Port pane Select the Advanced tab  To view the traffic statistics Statistics  To view the connection status Connection Status PPPoE Connection Wireless Settings Pane  To display the Guest Network pane Select the Advanced tab Guest Network Pane Troubleshooting Network Settings Wireless SettingsQuick Tips Sequence to Restart Your Network Power LED Stays Amber Power LED Is Off or BlinkingTroubleshoot with the LEDs All LEDs Remain Lit after Startup Wireless LED Is Off Internet or LAN Port LEDs Are OffWPS Push N Connect Button Blinks Amber Cannot Log In to the Router Cannot Access the Internet  To check the WAN IP address Troubleshoot Internet Browsing Changes Not Saved Troubleshoot a PPPoE Internet Connection To troubleshoot a PPPoE Internet connection Troubleshoot Your Network Using the Ping Utility Wireless ConnectivityWireless Signal Strength Test the LAN Path to Your Router Request timed out Test the Path from Your Computer to a Remote Device Troubleshooting 134 Supplemental Information WNR2000v4 router factory default settings Factory Settings WNR2000v4 router specifications Technical Specifications Numerics Index 139 140 141 142