Router Information Pane, Internet Port Pane | NETGEAR WNR200v4

N300 Wireless Router WNR2000v4

Router Information Pane

To display the Router Information pane: Select the Advanced tab.

The Router Status screen displays. The Router Information pane is located in the upper left of the screen.

The following settings are displayed: Hardware Version. The router model.

Firmware Version. The version of the router firmware. It changes if you upgrade the router firmware.

GUI Language Version. The localized language of the router user interface. Operation Mode. The mode in which the router operates:

•Router. The router functions in default mode.

•AP. The router functions as an access point only.

LAN Port.

•MAC Address. The Media Access Control address for the LAN port. This is the unique physical address being used by the Ethernet (LAN) port of the router.

•IP Address. The IP address that is used by the Ethernet (LAN) port of the router. The default is 192.168.1.1.

•DHCP Server. Identifies whether the router’s built-in DHCP server is active for the LAN-attached devices.

Internet Port Pane

To display the Internet Port pane: Select the Advanced tab.

The Router Status screen displays. The Internet Port pane is located in the upper right of the screen.

The following settings are displayed:

MAC Address. The Media Access Control (MAC) address for the Internet port. This is the unique physical address being used by the Internet (WAN) port of the router.

IP Address. The IP address that is used by the Internet (WAN) port of the router. If no address is shown or the address is 0.0.0, the router is not connected to the Internet.

Connection. Shows whether the router is using a fixed or dynamic IP address on the Internet port. If the value is DHCP, the router obtains an IP address dynamically from the ISP or from a DHCP server on your LAN.

Monitoring

120

Image 120

NETGEAR WNR200v4 user manual Router Information Pane, Internet Port Pane, LAN Port

Contents

N300 Wireless Router WNR2000v4 Support ComplianceTrademarks Contents Genie Advanced Home Monitoring Appendix a Supplemental Information Hardware Setup Get to know your router Hardware Features Unpack Your Router Front Panel Router front panel has the following status LEDs and button N300 Wireless Router WNR2000v4 Front panel LED descriptions Back panel has the following buttons, ports, and connector Back Panel Position Your Router Label  To prepare your router for installation Cable Your Router Verify the Cabling Getting Started with Netgear Genie Connect to the router Router Setup Preparation Types of Logins and AccessWireless Devices and Security Settings Use Standard TCP/IP Properties for Dhcp Netgear genie Setup Use Netgear genie after Installation To use Netgear genie to set up your router Browse to http//routerlogin.net Upgrade Router Firmware Router Dashboard Basic Home Screen Basic screen Change the Password Password Recovery Add Wireless Devices or Computers to Your NetworkManual Method Wi-Fi Protected Setup WPS Method  To use WPS to join the wireless network Genie Basic Settings Your Internet connection and network Internet Setup  To view or change the Internet setup Internet Setup Screen Fields Does Your ISP Require a Login? Select either Yes or No Basic Wireless Settings Internet IP Address  To view or change basic wireless settings Wireless Settings Screen Fields Wireless Network WPA-PSK, WPA2-PSK, and WPA-PSK + WPA2-PSK Mixed Mode  To change the WPA wireless security option and passphrase  To configure WPA/WPA2 Enterprise security WPA/WPA2 Enterprise  To configure WEP security Attached Devices Parental Controls Live Parent Controls screen  To set up Live Parental Controls Click the Take me to the status screen button Sign in to your OpenDNS account screen  To set up a guest network Select Basic Guest Network Guest Network Genie Basic Settings Specify custom settings Genie Advanced Home LAN Setup QoS Setup Setup Wizard  To launch the Setup Wizard WPS Wizard  To use the WPS Wizard Setup Menu WAN Setup WAN Setup Screen Settings To change the WAN settings Default DMZ Server  To set up a default DMZ server Change the MTU Size LAN Setup  To change the MTU size LAN Setup Screen Settings  To change the LAN settings Manage the Dhcp Server on the Router Use Router as a Dhcp Server Set Up Address Reservation Clear the Use Router as Dhcp Server check box To reserve an IP address  To edit or delete a reserved address entry QoS Setup Wi-Fi Multimedia Quality of Service for Wireless Traffic To enable upstream QoS Optimize Internet Gaming with Upstream QoS Quality of Service Priority Rules and Internet Access Select the Turn Internet Access QoS On check button  To view, change, or delete a QoS rule Genie Advanced Home  To create a QoS policy for an application or online game Click the Add Priority Rule button Create a QoS Rule for a Router LAN Port Create a QoS Rule for a MAC Address  To edit or delete a MAC address on the MAC Device List Existing QoS rules display Keep unwanted content out of your Security  To set up keyword blocking Keyword Blocking of Http Traffic Block Services Port Filtering Exempt a Computer from Blocking and Logging To delete a keyword or domain  To specify a trusted computer  To block services Security Schedule Blocking  To schedule blocking  To set up email notifications Security Event Email Notifications Allow or Block Access to Your Network  To set up access controlSelect Advanced Security Access Control Select the Turn on Access Control check box View or Add Allowed Devices Not Connected to the Network Select the View list of allowed devices drop-down list View or Add Blocked Devices Not Connected to the Network Select the View list of blocked devices drop-down list Administration Manage your network Upgrade the Router Firmware  To check for new firmware and update your router View and Configure Logs  To view the log Manage the Configuration File Back Up Settings To configure which actions are logged Restore Configuration Settings  To restore configuration settings that you backed upDo not interrupt the reboot process Erase Do not interrupt the reboot process Advanced Settings Advanced Wireless Settings Advanced Settings for Your Wireless Network To change advanced settings for your wireless network Set Up a Wireless Schedule  To configure and enable the wireless schedule Set Up the WPS Settings  To change the WPS settings for your wireless network Wireless Access Point AP  To enable and configure AP mode Wireless Distribution System WDS Following figure shows a wireless repeating scenario Set Up the Base Station Select the Enable Wireless Repeating Function check box Set Up a Repeater Advanced Settings Port Forwarding and Port Triggering Configuration Concepts Remote Computer Access Basics Port Triggering to Open Incoming Ports Destination port number Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering Set Up Port Forwarding to Local Servers  To set up port forwarding Add a Custom Service Click the Add Custom Service button Edit or Delete a Port Forwarding Entry Application Example Make a Local Web Server Public To edit or delete a port forwarding entry Set Up Port Triggering  To make a local web server public  To set up port triggering  To edit or delete a port triggering entry Dynamic DNS  To set up Dynamic DNS Select the Use a Dynamic DNS Service check boxDynupdate.no-ip.com  To set up a static route Static Routes  To edit or delete a static route Remote Management Universal Plug and Play Select the Turn Remote Management On check box Advanced Settings 105  To set up an IPv6 Internet connection type IPv6 Requirements for Entering IPv6 Addresses IPv6 Auto Detect IPv6 Auto Config Advanced Settings 109 IPv6 6to4 Tunnel  To set up a pass-through IPv6 Internet connection IPv6 Pass ThroughIPv6 Fixed Advanced Settings 112  To set up an IPv6 Internet connection with a Dhcp server IPv6 Dhcp  To set up a PPPoE IPv6 Internet connection IPv6 PPPoE Traffic Meter  To start monitoring Internet traffic Advanced Settings 116 Advanced Settings 117 Monitoring Monitor your router and network traffic Router Status and Usage Information Screen Router Information Pane Internet Port PaneLAN Port  To display the Internet Port pane Select the Advanced tab Statistics  To view the traffic statistics Connection Status  To view the connection status Wireless Settings Pane PPPoE Connection Guest Network Pane  To display the Guest Network pane Select the Advanced tab Troubleshooting Wireless Settings Network SettingsQuick Tips Sequence to Restart Your Network Power LED Is Off or Blinking Power LED Stays AmberTroubleshoot with the LEDs All LEDs Remain Lit after Startup Wireless LED Is Off Internet or LAN Port LEDs Are OffWPS Push N Connect Button Blinks Amber Cannot Access the Internet Cannot Log In to the Router Troubleshoot Internet Browsing  To check the WAN IP address Changes Not Saved Troubleshoot a PPPoE Internet Connection To troubleshoot a PPPoE Internet connection Wireless Connectivity Troubleshoot Your Network Using the Ping UtilityWireless Signal Strength Test the LAN Path to Your Router Test the Path from Your Computer to a Remote Device Request timed out Troubleshooting 134 Supplemental Information Factory Settings WNR2000v4 router factory default settings Technical Specifications WNR2000v4 router specifications Index Numerics 139 140 141 142