The quality of the blank disc determines write quality. It is recommended to use only the specified disc type.

It is recommended that you run a compare while writing data.

Making a backup is recommended if the data is important. Recorded data may degrade over long storing periods. It is recommended to make backups periodically.

Do not shock or vibrate the product while reading or writing, as this may result in malfunction of the drive or make the disc unusable.

Do not use a cracked, warped, or deformed discs because it may break in pieces inside the product and cause malfunction or injury.

A disc may become unreadable or unwritable if it has a small scratch or dirt; therefore, please handle it with care.

Do not touch both surfaces when holding a disc.

Created discs may not be readable in some players.

The completed job display of EPSON Total Disc Monitor shows the number of successes, number of failures, and number of discs printed.

Printing on CDs/DVDs with a commercially available software package

When you print on CDs/DVDs with a commercially available software package that supports CD/DVD printing, you have to make the following settings.

Size

124 x 124 mm (4.88 x 4.88")

 

 

Type

CD/DVD Label, CD/DVD Premium Label, or EPSON

 

Specified CD/DVD Label

 

 

Margins on all sides

2 mm (0.08")

 

 

Standard Mode

Loading CDs/DVDs

Follow the steps below to load CDs/DVDs.

Publishing Discs 22