Epson PP-100 Error associated with drive

Error associated with drive

		Lights						Conditions/Remedies
Power	Busy	Error	Ink		Stacker
				1	2	3	4
								Drive tray open/close error
								Turn off the product and check inside for any
								objects. Also, unplug the power cable to
								clear the error. Then, publish the disc again. If
								the same error occurs frequently, contact
								your dealer.
								Internal drive error
								Turn off the product, unplug the power
								cable, and then check the inside of the
								drive. If the same error occurs frequently,
								contact your dealer.
								Writing error
								The error could not be cleared even if it
								repeated itself for the retry number of times.
								Disc may have a problem. Replace the disc
								and resume job.
								If there is a problem with the drive, change
								the drive with EPSON Total Disc Setup and
								resume the job. If the same error occurs
								frequently, contact your dealer.
								Invalid disc error
								An invalid disc error has occurred, such as
								the disc may not be blank or the disc does
								not have enough space. Or, the disc loaded
								in the stacker differs from the disc type you
								set in the EPSON Total Disc Setup Properties
								dialog box.
								The error could not be cleared even if it
								repeated itself for the retry number of times.
								Check that the disc is blank and not
								damaged.
								Then, in the EPSON Total Disc Setup Properties
								dialog box, select the disc type that is the
								same as the discs loaded in the stacker. If
								you use the proper disc but the same error
								occurs frequently, contact your dealer.

Troubleshooting 72