❏Leave enough room around the product to allow for sufficient ventilation.

❏Place the product near a wall outlet where the plug can be easily unplugged.

Using the product

Observe the following when using the product:

❏Do not insert objects in the product.

❏Take care not to spill liquid on the product.

❏Do not use aerosol products that contain flammable gases inside or around this product. Doing so may cause fire.

❏Always turn the product off using the P power button. When this button is pressed, the

power light flashes. Do not unplug the product or turn off the power to the outlet

until the power light stops flashing.

❏Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the product from printing.

❏Be careful not to trap your fingers when closing the disc cover.

❏The product uses galvanized sheet metal and this may cause rusting at the edges; however, this does not cause any harm to the function of the product.

❏Do not place any drink or liquid on the product as penetration by liquid inside the product will cause a malfunction.

Handling ink cartridges

Observe the following when handling the ink cartridges:

❏Keep ink cartridges out of the reach of children. Do not allow children to drink from or handle the cartridges.

❏Do not shake ink cartridges after opening their packages; this can cause leakage.

❏Be careful when you handle used ink cartridges, as there may be some ink remaining around the ink supply port. If ink gets on your skin, wash the area thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor immediately.

❏Do not remove or tear the label on the cartridge; this can cause leakage.

Important Notice and Safety Instructions 9