Lights | Conditions/Remedies |
Power Busy Error Ink Stacker
1 2 3 4
Stacker 3 is inserted for Standard Mode or
External Output Mode
Remove Stacker 3.
Stacker 1 is not correctly inserted
Make sure that Stacker 1 is correctly inserted.
Stacker 2 is not correctly inserted
Make sure that Stacker 2 is correctly inserted.
Stacker 3 is not correctly inserted for Batch
Mode
Make sure that Stacker 3 is correctly inserted.
Stacker 1 is empty
Load discs into Stacker 1.
Stacker 2 is empty
Load discs into Stacker 2.
Stacker 1 is overloaded
Remove discs so that discs are below the red line.
Stacker 2 is overloaded
Remove discs so that discs are below the red line.
Stacker 3 if full
Remove published discs from Stacker 3.
Stacker 4 if full
Remove published discs from Stacker 4.
Stacker 4 is open
Close Stacker 4.
Troubleshooting 69