4.Insert the ink bags into the ink box by clipping them into the corresponding connectors attached inside the box. Each section is marked with which color ink should be placed there.
Remember to match the
right color ink to its
corresponding cartridge chamber. Once the tube is filled, there is no way to undo it!
5.Once all ink bags are connected inside your Quick Connect II™ ink box, you will need to obtain the small primer bottle to prime each line.
6.Take the cartridge in one hand and the priming bottle in the other as shown in the picture to the right. Squeeze the priming bottle to release all of the air and insert it into the bottom of the cartridge to pull ink through the line and just bring ink into the reservoir.
7.Once ink is in the reservoir, pinch together the clamp that’s connected to the tube on the outside of the box. This will ensure that no more ink will pull into the reservoir until you are ready for it.
8.Do this for each cartridge.
9.Place the lid back onto the Quick Connect II™ ink box and gently place the cartridges on top of the box while you are completing the printer setup.
Printer Set-up for the R1800
1.Turn the printer on, lift the lid, and press the cartridge replacement button.
2.The cartridge bay will shift into the remove position. Lift the bay lid and remove any installed cartridges.
- 5 -
