WARNING
The power must be OFF when you move the print head. Moving the print head when the power is ON may damage your printer. If you’ve been using your printer just before changing the ribbon cartridge, be careful not to touch the print head because it becomes hot during use.
3.Before installing the ribbon cartridge, turn the small knob on top in the direction of the arrow to tighten the ribbon as shown in Figure
Figure
4.Hold the cartridge by the two plastic tabs. Lower the cartridge into the printer, guiding the two pins on each end of the cartridge into the slots in the printer frame, as shown in Figure
5.Now use the point of a pencil to guide the ribbon into place be- tween the ribbon guide and the print head as shown in Figure
6.With the cartridge in place, again turn the ribbon knob in the direction of the arrow to tighten the ribbon.
And that’sSetting Up Your |