want to turn off either mode, press its button again. It beeps once and the indicator light turns off to show that the mode is cancelled.
As you can see, SelecType makes it easy to choose either NLQ or condensed, and the indicator lights always tell you which modes you’ve selected.
Trying out SelecType is a simple
1.Create a short sample document or file with your favorite application program.
2.Press either or both of the SelecType buttons.
3.Print the document or file using your application program’s print command.
If SelecType does not workSome applications programs are designed to control all typestyle functions. Before each printing operation, these programs cancel all previous typestyle settings by sending a signal (INIT) or by sending specific control codes to cancel certain typestyles. These signals or control codes may cancel your SelecType settings.
One reset signal, however, does not affect your SelecType settings. This is the ESC @ command.
You can see whether your program is changing your settings by watching the buttons when printing starts. If the lights change, the program is controlling the typestyles.
If your application program changes your SelecType settings, you have two choices:
1.Use the program’s setup procedure (which could be called by another name, such as install) to remove the codes that interfere with your SelecType settings.
2.Use the print control codes for your application program instead of SelecType to control your printing. Most programs that cancel SelecType settings also have sophisticated print control commands that give the same results that SelecType does. The manual for your program should explain the necessary commands.
Setting Up Your |