Before you change any DIP switch settings, turn the printer around to give you easy access to the switches. Then you can easily turn the switches on and off with a thin pointed object, such as a small screwdriver or the cap of a ballpoint pen. The switches are ON when they are UP and OFF when they are DOWN.
NoteWhen you change a DIP switch setting, turn off the power, reset the switch or switches, then turn on the power again. The printer checks and recognizes new settings only at the time you turn the power on.
The operating modeThe
The IBM printer emulation mode is for software that is designed only for IBM printers. It is not necessary to use this mode for your
There are only two cases in which you may want to use the IBM printer emulation mode:
1.Your software lists only IBM printers in its printer selection menu.
2.You need to use the following characters and your application software will not print them in the Epson mode:
If you select IBM printer emulation mode with the DIP switch and choose an IBM printer in your software’s printer selection menu, your
Setting Up Your |