5.Pull the paper bail lever forward. This makes the paper feed into the printer.

6.When the paper stops, push the paper bail lever back.

7.Hold the printer cover vertically and fit the notches in its front corners over the pins at the front of the printer case (as shown in Figure 24). Then tilt the cover back into place.

Figure 2-4.

Installing the printer cover

When you have learned this procedure, you’ll probably leave the cover on when you load single-sheet paper. If you wish, you can raise the cover to the vertical position while you’re loading the paper. The two icons (small pictures) on the printer cover will help you remember the correct positions of the levers.

Now you are ready to print on single-sheet paper.

Choosing and Loading Paper

2-5