Table
Switch | Function | |
number | ||
l - l | Select condensed or normal | |
| characters | |
Select slashed or unslashed zero | ||
Select character table* | ||
Select printer commands | ||
Select print quality | ||
Select international character set | ||
| ||
|
In IBM printer emulation mode, a CR is added to an 1
Action | Action |
when ON | when OFF |
Condensed | Normal |
00
Graphics Italics
IBM printer | ESC/P |
emulation |
|
mode |
|
NLQ | Draft |
See Table
or ESC J if this switch is OFF
Table
| S w i t c h |
| Action | Action |
| number | Function | when ON | when OFF |
1 Select page length | 12 inch | 11 inch | ||
Select automatic sheet feeder | Selected | Not selected | ||
|
| mode |
|
|
1 | 1 inch | None | ||
| 1 Add line feed after carriage return | CR + LF | CR only |
Note: The factory setting for all switches except
International Character Sets
Thirteen international character sets are available in Epson mode. Eight of these are selected by DIP switches
In IBM printer emulation mode, you can select only two character sets; the standard character set (Table 1) and the international character set (Table 2). You can see the differences by looking at the IBM character tables in Appendix B. There is also a command to let you print any of the characters in the international character set and several additional characters. Together these form the symbol set. The
Defaults and DIP Switches | D - 3 |