Epson U11, U12 Running Tests, 0- Exit, CHECK MENU, System Board, System Memory, 1- Seek check, Diskette Drive A, Serial Port COM1, Hard Disk Drive #1, Parallel Port LPT1

Running TestsFollow these steps to run a test from the Execute menu:

1.Press it) or m to select Execute. You see the Execute menu, such as the following:

System Board

Numeric Coprocessor

System Memory

Diskette Drive A

Hard Disk Drive #1

Serial Port COM1

Parallel Port LPT1

Video Adapter Test

2.Press (7) or [SJ to highlight the device you want to test and press m You see the Repeat prompt:

How often to repeat test? 1

3.If you want to run the test once, press I. To run the test e the number of times you want to run

4.If there is only one test for a device, the program begins testing immediately. If there is more than one test for the device, you see a submenu, such as the following:

HARD DISK DRIVE(S) AND CONTROLLERCHECK MENU1- Seek check2- Write, read check3- Read, verify check4- Run all above checks0- Exit

Running System Diagnostics 5-5