Epson U11, U12 Changing a Password, 123/ABC, The screen does not display what you type, To change your password, follow these steps:

Note

If you turned on network server mode when you ran the SETUP program, you need to use a different procedure to enter your password. See “Using Your Computer as a Network Server” on page 1-27.

Changing a PasswordTo change your password, follow these steps:

1.If you do not have a hard disk, insert your system diskette in drive A.

2.Turn on or reset the computer. At the key prompt, enter your current password followed by a forward slash (/) and the new one you want to use. For example, if your current password is 123 and you want to change it to ABC, type:

123/ABCThe screen does not display what you type.

Do not use characters requiring the m key, such as %, @, or #, in your new password. The computer does not distinguish between characters that are produced with the m key and those that are not.

3.Press m A happy face character appears and then the computer loads the operating system.

Using Your Computer 1-25