Epson U11, U12 or Program, Stopping a Command or Program, hrpo, $GLiC), =-l-[F1zl, Q Hold down i and press [cl, P Hold down [ctrll and press m

Special key functions (continued)

hrpo=

Changes the function of the numeric/cursor keys from entering numbers to positioning the cursor.

=-l-[F1zl	Perform special functions within application
pa	programs.	I
	Prints the screen display on a printer.
	Generates the System Request function in some
	application programs (used with I)],.
lserdllpal	Controls scrolling in some applications.
Ipwrrl	Suspends the current operation.
m	Stops the current operation (used with [CM]).

The [$GLiC), [lunlodr], and [*a] keys work as toggles; press the key once to turn on a function and again to turn it off. When the function is enabled, the corresponding light in the upper right comer of the keyboard is lit.

Stopping a Command or Program

You may sometimes need to stop a command or program while it is running. If you have entered an MS-DOS or application program command that you want to stop, try one of the following:

Q Hold down i and press [clP Hold down [ctrll and press m.

If these methods do not work, you may need to reset the computer as described below. Do not turn off the computer to exit a program or stop a command unless you have to, because the computer erases any data you did not save.

Using Your Computer 1-21