Epson U11, U12 Using the ESPEED Program, [cbll[m, [mJIm1[-1, Q Turn off the computer, Cl Change it using the SETUP program, LI Press [cbl) (Alt) 66)or the RESET button

Note

You can use the commands listed above while you are running a program. However, if the program uses one of these commands for another function, you cannot use it to change the processor speed. For example, if you are running

a program that uses the [cbll[m6- command to move the cursor, you cannot enter [mJIm1[-1 to change the processor speed to low. Another alternative is to use the ESPEED program, described below.

The speed setting remains in effect until you do the following:LI Press [cbl) (Alt) 66) or the RESET buttonQ Turn off the computerCl Change it using the SETUP programPChange it with another keyboard command P Change it using ESPEED.Using the ESPEED Program

ESPEED provides an easy way to change the processor speed if your application program does not recognize the [cbll key commands or if you want to include the program command in a batch file.

The ESPEED program is on the Reference diskette. If you have a hard disk drive, copy the file ESPEED,EXE from your Reference diskette onto your hard disk and run the program from there. If you do not have a hard disk, insert your Reference diskette in drive A and log onto drive A before you enter the command to start the program.

1-32 Using Your Computer