Ericsson CH388, CF388 manual Using Menus, Placing & Receiving Calls, To end your call, press G

>Envelope Icon. Indicates that your handset has received a text message or a text notification that you have a voice message in your Answering Machine. This message symbol flashes when your text message storage capacity is full. (Note: on model CF 388, the key that shows this symbol can dial you into A123to receive voice messages from your Answering Machine.)

>Message Area. Displays commands, prompts, and text messages as you use your handset. Also displays the network you are using, phone numbers as you dial them, and the time elapsed during your call.

>Time. Displays the current time in either standard (am/pm) or 24-hour notation (for example, 9:00 am is 0900; 9:00 pm is 2100.) Also displays the alarm time when you set the handset alarm.

>L1/L2. Indicates the line currently active if you have optional two-line service (a second phone number that rings at your handset).

Using Menus.

As you use your handset, menus can be displayed to let you perform a wide range of important functions.

To bring up menus, press the left or right CDkey and hold down (or repeatedly press) until the menu you want is on display. Then press Fto select the menu.

For full details on how to use each menu, see your Ericsson User’s Manual.

PLACING & RECEIVING

CALLS

Now you’re ready for the fun part: how simple and satisfying it is to use your Omnipoint handset to make and receive calls.

Your handset can make and receive calls only when it is switched on, has a valid SIM Card inserted, and is located in the Omnipoint coverage area or in a “roaming” network.

To make a call, just follow these simple steps:

>If your handset is off, press Gand hold until you hear a click. The display will light up. In a few seconds, “OMNIPOINT” will be displayed.

>Dial the number, just as you would from your home phone.

•If it’s in the same area code as your Omnipoint number, enter the 7-digit number.

•If you’re calling to another area code, dial 1, the 3-digit area code, and the number.

•For international calls, dial 011, plus the country code and the number you’re dialing, including area code.

>As you dial, the number you’re dialing will appear on your display. If you make an error while dialing, press Eonce to erase the last digit on your display, or press and hold Eto erase the entire display so you can begin again.

>Press Fto place your call. While you talk, you will see the elapsed time of your call in the display.

>To end your call, press G.

11 12