Ericsson HM200c/HM201c manual PipeRider LEDs

PipeRider® Cable Modem User's Guide HM200c/HM201c

PipeRider LEDs

Looking at the top of the PipeRider cable modem, you’ll see five amber-colored light-emitting diodes (LEDs) along the left side of the unit. These LEDs indicate the current state of the cable modem and provide useful diagnostic information. Although the functions of the LEDs depend upon the operational state of the cable

modem, the general purpose of each is described below. Each LED can either be ON (lit), OFF (unlit), flashing at a certain rate, or blinking periodically to indicate activity.

Power

Indicates whether or not there is power to the cable modem. This

LED remains ON when the modem is receiving power.

Computer Link

Indicates the status of the link (Ethernet or USB) between the cable modem and your computer. After the Power-up Diagnostics and Initialization have completed, the LED will be ON, and will blink when there is activity on the link. If the link is bad, the LED will be OFF.

Cable Link

Indicates the status of the link between the service provider and the cable modem. After the Power-up Diagnostics and Initialization have completed, the LED will be ON, and will blink when there is activity on the link. If the link is bad, the LED will be OFF.

PipeLock

Indicates the current state of the PipeLock feature. When PipeLock is

enabled, the LED will be ON. When PipeLock is disabled, the LED will be OFF.

Programmable

This LED is reserved for use by the service provider.