SOFTWARE INSTALLATION AND |
A | "User | Profile |
Successfully Written..." message must
be received before continuing.
System Manager Database Uploads
System Manager databases contain all system information for all defined entities (units, groups, sites). These databases can be downloaded to the console by requesting database uploads from the CEC/IMC Manager. Since this data is broadcast to all consoles in the CEC/IMC system, if possible, all consoles should be
1.From the CEC/IMC Manager's "CEC/IMC MOM Options" main menu, select the "System Manager Data" option. This will display the System Manager data menu.
2.Select "Upload From System Manager".
3.From the "SYSTEM MANAGER UPLOAD STATUS" screen, select <F1> then <F8> for a full unit upload. After the upload is complete, exit the unit upload screen by pressing <Esc>.
4.From the "SYSTEM MANAGER UPLOAD STATUS" screen, select <F2> then <F8> for a full group upload. After the upload is complete, exit the group upload screen by pressing <Esc>.
5.From the "SYSTEM MANAGER UPLOAD STATUS" screen, select <F6> then <F8> for a full site upload. After the upload is complete, exit the site upload screen by pressing <Esc>.
6.From the "System Manager Data" menu, select the "Upload From MOM PC" option.
7.From the "MOM PC BASED SYSTEM MANAGER UPLOAD STATUS" screen, select <F3> then <F8> for a full conventional channel upload. After the upload is complete, exit the conventional upload screen by pressing <Esc>.
8.From the "MOM PC BASED SYSTEM MANAGER UPLOAD STATUS" screen, select <F5> then <F8> for a full console upload. After the upload is complete, exit the console upload screen by pressing <Esc>.
NOTE
System Manager database uploads must be accomplished before sending console privilege lists.
Console Privilege Lists
Each console must be sent its privilege list from the CEC/IMC Manager as follows:
1.From the CEC/IMC Manager's "CEC/IMC MOM Options" main menu, select the "Console Configuration" option. This will display the console configuration menu.
2.From this menu, select the "Console Privilege List" option.
3.From the "CONSOLE PRIVILEGE LIST UPLOAD" screen, enter the number of the console (1 - 32).
4.Select <F7> to send the privilege list data to the console.
Saving Database Information
At the C3 Maestro console, the following database information is saved automatically to the PC's hard disk drive after the last record is received. No user action is required:
∙User Profiles
∙Hardware Configurations
The following data is not saved automatically, but on demand or by prompt:
∙System Manager Upload Data
∙CEC/IMC Manager Upload Data
∙Module
Upload data should be saved after it is transferred to the console's PC. Modules
CEC/IMC AUXILIARY I/O
A C3 Maestro console may be utilized to monitor and control CEC/IMC auxiliary I/O (input/output) events. CEC/IMC firmware/software version 4.x and earlier provides 30 total auxiliary I/O events and version 5.x and later provides 255 total auxiliary I/O events.
At the console, no auxiliary
29