Ericsson W20 manual Authentication, Remember my, APN 3G, APN 2G

Configuration and Management

Note: The data size and packet counters have the upper limits of 4 GiB and 232 packets (more than 4 billion packets). When these limits have been reached, the counters wrap around to zero.

2.4.2Authentication

Internet access requires authentication of the Ericsson W20. Depending on the current Internet service setup, the authentication requests may differ. Your service provider provides the Ericsson W20 SIM card and details needed for authentication.

The following authentication details may be required:

PIN	The Personal Identification Number, which is used for
	SIM authentication.
Remember my	If enabled, SIM authentication is automatic and you
PIN	will not have to enter the PIN in case of a system
	restart.
APN (3G)	The 3G Access Point Name, which is a reference to
	the UMTS Internet access point on the service
	provider’s network. The APN usually has the format
	<name.service_provider.country>.
APN (2G)	The 2G Access Point Name, which is a reference to
	the GPRS/EDGE Internet access point on the service
	provider’s network. The APN usually has the format
	<name.service_provider.country>.

PPPuser name The Point-to-Point Protocol Internet mode user name, which is used for user authentication.

PPPpassword The Point-to-Point Protocol Internet mode password,

which is used for user authentication.

If you have not used the Configuration Wizard for configuration of Internet access, or authentication is required because of a reset to factory default configuration, fill in the PIN, APN (2G), APN (3G), PPP user name, and

PPPpassword fields. For automatic SIM authentication in case of a system restart, select the Remember my PIN check box. Click Apply .

Note: Only enter details that you have received from your service provider and leave other fields empty. If the PIN is locked message is displayed, no PIN is required.

22 1/1551-CRH 102 167 Uen Rev A 2006-09-07