Ericsson W20 manual Connected Devices, Open WEP 64 bit WEP 128 bit WPA WPA2

Configuration and Management

Authentication The authentication method, which can be one of the following:

Open

WEP (64 bit)

WEP (128 bit)

WPA

WPA2

Passphrase / The WEP 64-bit data encryption or 128-bit data

Keyencryption key or the WPA or WPA2 authentication and encryption pass phrase.

Enable whitelist If this check box is selected, only wireless devices added to the whitelist are allowed to access the Ericsson W20.

Select an authentication method from the Authentication list.

Note: Make sure that the operating system(s) and wireless LAN interface(s) of the wireless client(s) support the selected authentication method.

If you have selected WEP (64 bit) or WEP (128 bit), type the key for encryption in the Passphrase / Key field. A 64-bit data encryption key includes 10 characters. A 128-bit data encryption key includes 26 characters. Only the hexadecimal numbers 0 to 9 and letters A to F are allowed.

If you have selected WPA or WPA2, type the pass phrase for authentication and encryption in the Passphrase / Key field. A WPA or WPA2 pass phrase is case sensitive and consists of between 8 and 63 optional characters. For security reasons, you are recommended to use a pass phrase that contains at least 20 characters.

Click

Apply to save the settings.

2.6.4Connected Devices

The Connected Devices list includes the MAC (Media Access Control) addresses of all wireless devices currently connected to the Ericsson W20.

To find out about the MAC address of a PC using Microsoft Windows, open a command prompt and type ipconfig /all. A list of system properties is displayed. The MAC address is found on the Physical Address row.

1/1551-CRH 102 167 Uen Rev A 2006-09-07 31