Configuration and Management
IP address range to The last IP address in a range of IP addresses that can be assigned to the LAN clients.
Max Lease Time [sec] The IP address lease time, specified in seconds:
min: 60
max: 2147483647
To disable the DHCP server, clear the Enable DHCP server check box.
If you for some reason want to configure your connected devices with static addresses, make sure that the addresses are outside the DHCP server IP address range.
To change the range of available addresses, change the IP addresses in the IP address range from and IP address range to fields.
Note: The DHCP server IP address range has to be on the same subnet as the Ericsson W20 LAN IP address. The IP address range must not include the Ericsson W20 IP address.
In the Maximum lease time [sec] field, enter the time (in seconds) you want the LAN device to lease the IP address before it is reassigned.
Click
Apply 
to save the settings.
2.5.2Traffic Statistics
The following information is displayed in the Traffic Statistics section on the LAN page:
Transmitted | The total size (and number) of transmitted data |
| packets on the LAN. |
Received | The total size (and number) of received data packets |
| on the LAN. |
Error | The number of invalid data packets. |
Overruns | The number of packet loss due to too many |
| incoming data packets. |
Dropped | The number of dropped data packets. |
Note: The data size and packet counters have the upper limits of 4 GiB and 232 packets (more than 4 billion packets). When these limits have been reached, the counters wrap around to zero.
26 |
