PC Configuration
Windows 2000
Follow the steps below to check the workgroup settings on a PC using Windows 2000:
1.In the Windows task bar, click the Start button, and then click Settings and Control Panel. The Control Panel window is displayed.
2.
3.On the Network Identification tab, click Properties
. The Identification Changes window is displayed.
4.Make sure that Workgroup is selected in the Member of section and that the name of the workgroup is exactly the same as on the Ericsson W20 File Sharing page. If not, select the Workgroup option and type the name in the field. If there is already a workgroup name, although not the same as on the Ericsson W20, you have to change the workgroup either on the PC or on the Ericsson W20.
5.If you have made any changes, click OK 
. Otherwise, click The Identification Changes window is closed.
Cancel
.
6.If you have changed the workgroup settings, follow the instructions on the screen to restart the PC.
3.3.3Setting Up a Mapping to a Storage Device
The following sections include instructions on how to configure a mapping to a mass storage device from a PC using Windows XP or 2000.
Windows XP
Follow the steps below to set up a connection to a shared storage device from a PC using Windows XP:
1.In the Windows task bar, click the Start button, and then click My Computer. The My Computer window is displayed.
2.From the Tools menu, select Map Network Drive…. The My Network Drive window is displayed.
3.Select a drive that is not already used from the Drive list.
4.In the Folder field, type \\<host_name>\<share_name> or click Browse… 
to locate the device. You find the host name and share name on the File Sharing page.
47 |
