Euphonix MC Control manual Solo, 4 SEL

USER GUIDE

professional control surface

4.3.3SOLO

The SOLO key lights red when that strip’s track is soloed and is unlit otherwise.

4.3.4SEL

Pressing a fader’s SEL key selects that track in the application and attentions it on the MC Control. The SEL key lights yellow when the track is selected and is unlit otherwise. All knob functions operate on the attentioned track.

NOTE: Some applications allow selecting multiple tracks if the Shift key on the work- station is held down while selecting tracks. In this case, the attentioned track is the one whose SEL key was most recently pressed.

4.3.5ASSIGN

Press the ASSIGN key to display the Assign tab in the EuControl Settings dialog (see Assign on page 56).

4.3.6REC

30

Press the REC key to enable recording on a track. The REC key lights red to indi- cate that track is enabled (armed) for recording. Press the REC key to cancel a track enabled for recording.

NOTE: Some applications blink the REC LED when armed but not recording and light solid when recording.

SURFACE CONTROLS

4.3.7AUTO

To change the application’s automation mode on a track, press the AUTO key until the desired automation mode displays on the Touchscreen.

Artist Series