EverFocus EDR810H Basic Wiring Instructions, Power, Cameras, Audio Input, Audio Output, Ethernet

2.1 Basic Wiring Instructions

Please refer to diagram 2.1 to assist you with this portion of the installation.

1.Power

Connect the power source or adapter into the power socket.

2.Cameras

Connect each cameras video output to the video inputs on the digital video recorder.

Note: At least one camera must be connected before the system is running for the auto detection of video standard to take effect.

3.Audio Input

The camera audio output or Microphone is connected to the audio input terminal at the rear panel.

4.Audio Output

Connect the speaker or other audio listening devices to the audio output terminal on the back of the digital video recorder.

5.Ethernet

The digital video recorder may be viewed from a PC via the LAN connector using a RJ45 Ethernet cable.

6.RS485

The digital video recorder can be controlled from an EKB500 keyboard via RS485. Note: This can be done using a RJ45-to-serial cable.

7.Main Monitor

Connect a monitor to the main monitor output connector. The main monitor displays live or recorded cameras in any available format.

Note: The main monitor must be connected in order to make configuration changes, enter the main menu, or do a playback at the machine.