EverFocus EDR410M, EDR810H, EDR410H a Go to a PC that is connected to the internet, Diagram

8.TIME SYNCHRONIZE: Select “ON” or “OFF” to enable or disable time synchronize which will automatically update the DVR’s time when connected to a network. To change this, simply use the Jog Dial on the DVR.

9.TIME SERVER: You can set the time server address that the DVR connects to for time synchronize. To determine the IP address of NTP Server, please follow these steps:

a)Go to a PC that is connected to the internet.

b)Click on “START” -> “RUN” -> type “cmd” and press “OK”.

c)In the Dos Prompt, type “ping pool.ntp.org” to find out the IP address of an NTP Server.

Diagram 3.3

9.TIME ZONE: You can set the time zone that the DVR adjusts to when updating from the time server.

Atlantic Daylight Time subtract 3 hours from GMT

Atlantic Standard Time subtract 4 hours from GMT

Eastern Daylight Time subtract 4 hours from GMT

Eastern Standard Time subtract 5 hours from GMT

Central Daylight Time subtract 5 hours from GMT

Central Standard Time subtract 6 hours from GMT

Mountain Daylight Time subtract 6 hours from GMT

Mountain Standard Time subtract 7 hours from GMT

Pacific Daylight Time subtract 7 hours from GMT

Pacific Standard Time subtract 8 hours from GMT

Alaska Daylight Time subtract 8 hours from GMT