EverFocus EDR810M, EDR810H, EDR410H Water Mark, Record Mode, Pre-Alarm Recording, Relay Out

4.WATER MARK:

ON: Recording is overlaid by a visible watermark (“W”).

OFF: No watermark.

5.RESOLUTION: The resolutions for NTSC are 720x480, 720x240 and 360x240; the default value is 720x240. The resolutions for PAL are 720x576, 720x288 and 360x288; the default value is 720x288.

NOTE: The resolution determines the maximum record speed supported by the DVR.

NTSC

720x480 = 30 IPS (this IPS value is divided by the amount of cameras installed) 720x240 = 60 IPS (this IPS value is divided by the amount of cameras installed) 360x240 = 120 IPS (this IPS value is divided by the amount of cameras installed)

6.RECORD MODE:

REWRITE: Continue recording. Disk will begin overwriting if it is full.

STOP: Stop recording when disk is full.

7.AUTOWRITE WITHIN: You can set DVR to automatically overwrite after the selected number of days. If you do not wish to use this function, simply select “0”.

8.PRE-ALARM RECORDING

Select “YES” to enable pre-alarm recording function. Select “NO” to disable pre-alarm recording function.

9.RELAY OUT

By selecting “1”, user can easily identify whether DVR is recording or not if relay output is connected to a signaling device. Select “NONE” if you do not wish to identify recording status.