EverFocus EDR410M, EDR810H, EDR410H, EDR810M instruction manual Alarm Setup Menu

3.4 Alarm Setup Menu

Diagram 3.7

Diagram 3.7 is a screen shot of the ALARM SETUP MENU. An alarm is defined as an electrical, electronic, or mechanical device that sends an alert by means of a signal. In this case the signal triggers the recorder to start recording the alarmed event. This menu contains all the alarm operations and options needed to successfully set up an alarm recording. In the ALARM SETUP MENU the following fields are defined as:

1.ALARM: This field is to turn alarm recording on or off. The Default from the factory is set to Enable. To change this, simply use the Jog Dial on the DVR.

ENABLE: Enable alarm detection.

DISABLE: Disable alarm detection.

2.ALARM TYPE: This field is to set the type of alarm connection. The Default from the factory is set to N.O. To change this, simply use the Jog Dial on the DVR.

N. O.: Normal Open alarm.

N. C.: Normal Close alarm.

N.O. Trans.: When the alarm is triggered, buzzer starts to function no matter how long the alarm duration is set until you set it back to N.O.

N.C. Trans.: When the alarm is triggered, buzzer starts to function no matter how long the alarm duration is set until you set it back to N.C.