EverFocus EDR410M, EDR810H, EDR410H, EDR810M instruction manual Appendix B Alarm Board Configuration

Appendix

B

Appendix B: Alarm Board Configuration

Alarm I/O pin assignment

The alarm connector, Figure 1, is used to provide one sensor alarm input for each camera input. For easy operation, an alarm extension board, Figure 2, is provided to connect to the alarm connector.

Each alarm input requires two wires, one wire connects to the desired alarm input pin, the second wire connects to the ground. The alarm signal assignment is shown as below.

<Figure 1>

D-SUB 25 pin female connector

<Figure 2>

PR16D00400 Alarm extension