E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N
Basic Wiring Instructions
Please refer to diagram 1 on page 9 to assist you with this portion of the installation.
¾Power: Connect the power source or adapter into the power socket shown in diagram 1.
Please note: Do not plug the digital video recorder into the same power source as the cameras.
¾Cameras: Connect each cameras video output to the video input on the digital video recorder shown in diagram 1.
Please note: At least one camera must be connected before the system is running for the auto detection of video standard to take effect.
¾Audio Input: The camera audio output or Microphone is connected to the audio input terminal at the rear panel.
¾Speaker: Connect the speaker or other audio listening devices to the audio output terminal on the back of the digital video recorder.
¾Ethernet: The digital video recorder may be viewed from a PC via the LAN connector using a RJ45 Ethernet cable.
¾RS232/RS485: The digital video recorder may be controlled from a PC via RS232/RS485.
Please note: This can be done using a serial cable.
¾Main Monitor: Connect the main monitor output connector to a main monitor. The main monitor displays selected live or recorded cameras in any available format.
Please note: The main monitor must be connected in order to make configuration changes, enter the main menu, or do a playback at the machine.
¾Call Monitor: Connect the call monitor output connector to a call monitor. The call monitor displays selected live cameras in full screen format.
Please note: The call monitor will only display one full screen camera at a time.
9
